.... I finished adding a the brackets and a bazillion screws. It would have been so much easier if the tank and front plwyood were not on the stand. I could have drilled straight through with deck screws instead and used less brackets. I had to contort myself in between columns under the stand, and the back columns could not be predrilled so took a lot of elbow grease to get the screws in flush on the opposite side from the camera angle.

... Now I need to vacuum out all the sawdust and apply a coat of primer and later paint two coats of the same color grey. I still have paint left over from the main stand.

 

 

 

 

.